Components Affecting the Performance of Roller Crusher

Roller Crusher, also referred to as sand making machine, would be the most reliable and effective gear to crush the stones and is commonly made use of in mining and petroleum sector. Despite its high efficiency in heavy sector, the performance of roller crusher could be affected by 5 aspects.


Firstly, the hardness of the material can influence the function of roller crusher directly. It truly is very complicated to make sand with stuff which has a high stiffness. Besides, this kind of stuff will result in harm to the machine. As a result, the efficiency and the potential of sand producing will be weakened. So we need to pay close attention for the material that we choose.


Secondly, the physical components of material could affect the conveying method of the rock crusher machine. If the raw material consists of thin silt, this kind of component will come to be sticky throughout the conveying procedure, therefore producing the procedure significantly far more complicated. In this respect, we ought to cautiously screen the raw material before the complete approach. Meanwhile, we'd better separate the thin silt to reduce the negative impact it causes and ensure the right functioning from the machine.


Thirdly, to some extent, the degree of fineness of material has an impact on the capacity of sand making, normally speaking, the higher the requirement of fineness, the lower the efficiency of machine. So careful strategy really should be created according to various requirement, but in most cases, we can set the degree of fineness at medium.


Fourthly, the degree of viscosity of material could shorten the longevity of a machine. That is certainly to say, the material with greater degree of viscosity will easily get stick towards the wall of the stone crusher, if not be removed in time, the machine may not be capable of function correctly. Due to the fact of this, we ought to decide on material with lower degree of viscosity.


Lastly, the humidity degree of material may well cause clogging through the transportation method. When the material has a higher degree of moisture content material, clogging will happen in greater frequency. To solve this type of challenge, we have to help keep a tight control of the humidity degree of material. If the material is wet, we can dry it by implies of sun exposure or air drying.


With an international advanced level, roller crusher has already met the demand of many difficult jobs, basically it has turn into indispensable for the improvement of heavy industry, but to create the best of it, we can't neglect the elements mentioned above.